Three shipments of heavy duty raised expanded metal 4x8 catwalk grating have left Anping for shipyards and port maintenance contractors in Southeast Asia and the Mediterranean. The orders covered 5.0mm and 6.0mm Q235 plate in a 60 x 120mm raised diamond, hot dip galvanized to 85 microns, in sheets of 4 x 8ft and 4 x 10ft. Applications include engine room floor plates, tanker footing nets, quay maintenance platforms and conveyor access walkways.
Marine and port environments are unforgiving. Salt spray attacks sheared edges first, vibration fatigues welded joints, and loading crews drop tools and spares onto the deck from height. A one-piece expanded grating addresses all three problems at once: there is no weld to crack, the galvanized coating wraps the sheared edge as the sheet passes through the zinc bath, and a dropped object deforms one aperture rather than opening a seam.
| Attribute | Value |
|---|---|
| Plate thickness | 5.0mm, 6.0mm, 8.0mm |
| Pattern | 1/4 inch #20 up to 7# raised grating |
| Sheet size | 4 x 8ft, 4 x 10ft, 5 x 10ft, 6 x 10ft |
| Material | Q235 carbon steel, SS304, SS316L |
| Finish | Hot dip galvanized 70-100 micron |
| Feature | Durable, economic, strong, cut to size |
| Usage | Machine guards, ramps, platforms, walkways |
Thin mesh is adequate for infill panels, but wherever a surface must survive point loads, vehicle wheels or repeated impact, the strand must be thick enough that local deformation stays elastic. Port authorities typically specify 5.0mm or 6.0mm strand for quay platforms, while shipyards use 4.5mm and 5.0mm expanded mesh grating for engine room and pump room floors, where oil resistance and drainage matter as much as strength.
Floor plates are cut to the shipyard's own drawings, with cut-outs for pipe penetrations and cable runs made before galvanizing so that no bare steel is exposed on site. Every piece is marked with the compartment number and drawing reference, then bundled by compartment rather than by size, which removes a full sorting step from the refit schedule. Anping Velp Wire Mesh Products Co.,Ltd can also supply matching handrail standards, ladder rungs and toe boards from the same production batch.
Shipyards planning refit windows are advised to place orders at least 30 days ahead of the docking date, since 5.0mm and 6.0mm grating occupies the same stretching lines used for walkway sheet. Pre-shipment inspection by class society surveyors can be arranged at the factory.
![]()
![]()
![]()
WA/Tel: 86-156-14839157
Email:sale2@velpwiremesh.com
Web: www.perforatedmetal-mesh.com
Người liên hệ: Ms. Suzen
Tel: 15131889404